| Frequency range |
VHF: 136 - 174 MHz
UHF: 400 - 527 MHz
|
| Supported operating modes |
|
| Number of channels |
1024
|
| Number of zones |
64
|
| Channel spacing |
12.5 / 20 / 25 kHz (analog)
12.5 kHz (digital)
|
| Operating voltage |
7.4 V (nominal)
|
| Battery |
1500 mAh (lithium-ion battery)
|
| Battery service life (5/5/90) |
approx. 11 hours (analog)
ca. 16 hours (digital)
|
| Frequency stability |
±0.5 ppm
|
| Antenna impedance |
50 Ω
|
| Dimensions (H×W×D, with standard battery, without antenna) |
119 x 54 x 27 mm
|
| Weight |
approx. 310 g
|
| Programmable keys | |
| LCD display |
160 × 128 pixel, 65,536 colors, 1.8 inch, 4 lines
|
| Transmitting power |
VHF: 1 / 5 W
UHF: 1 / 4 W
|
| Modulation |
11 K0F3E at 12.5 kHz
14 K0F3E at 20 kHz
16 K0F3E at 25 kHz
|
| 4FSK digital modulation |
12.5 kHz (data only): 7K60FXD
12.5 kHz (data and voice): 7K60FXW
|
| Interfering signals and harmonics |
-36 dBm < 1 GHz
-30 dBm > 1 GHz
|
| Modulation limiting |
±2.5 kHz at 12.5 kHz
±4.0 kHz at 20 kHz
±5.0 kHz at 25 kHz
|
| Hum and noise |
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
|
| Adjacent channel selectivity |
60 dB at 12.5 kHz
70 dB at 20/25 kHz
|
| Audio sensitivity |
+1 dB to -3 dB
|
| Audio distortion |
≤ 3 %
|
| Digital vocoder type |
AMBE+2™
|
| Sensitivity (analog) |
0.22 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)
|
| Sensitivity (digital) |
0.22 μV / BER 5%
|
| Adjacent channel selectivity |
TIA-603: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
ETSI: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
|
| Intermodulation |
TIA-603: 70 dB at 12.5/20/25 kHz
ETSI: 70 dB at 12.5/20/25 kHz
|
| Spurious response rejection |
TIA-603: 70 dB at 12.5/20/25 kHz
ETSI: 70 dB at 12.5/20/25 kHz
|
| Signal-noise ratio (S/N) |
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
|
| Nominal audio power output |
0.5 W
|
| Audio distortion |
≤ 3 %
|
| Audio sensitivity |
+1 dB to -3 dB
|
| Conducted spurious emission |
< -57 dBm
|
| Operating temperature range |
-30 °C to +60 °C
|
| Storage temperature range |
-40 °C to +85 °C
|
| ESD |
IEC 61000-4-2 (level 4)
±8 kV (contact) ±15 kV (air)
|
| Protection against dust and moisture |
IP67
|
| Shock and vibration resistance |
MIL-STD-810 C/D/E/F/G
|
| Relative humidity |
MIL-STD-810 C/D/E/F/G
|
| Time to first fix (TTFF) cold start |
< 1 minute
|
| Time to first fix (TTFF) warm start |
< 10 seconds
|
| Horizontal accuracy |
< 10 meter
|
General data
| Frequency range | VHF: 136 – 174 MHz |
| Supported operating modes |
DMR Tier II in accordance with ETSI TS 102 361-1/2/3 |
| Number of channels | 1024 |
| Number of zones | 16 |
| Channel spacing (analog) | 12.5 / 20 / 25 kHz |
| Channel spacing (digital) | 12.5 kHz |
| Operating voltage | 7.4 V (nominal) |
| Standard battery | 2000 mAh (lithium-ion battery) |
| Battery service life (analog) (5-5-90 duty cycle, high transmitting power, standard battery) | VHF: approx. 11 hours / 10 hours (GPS mode) UHF: approx. 13.5 hours / 12 hours (GPS mode) |
| Battery service life (digital) (5-5-90 duty cycle, high transmitting power, standard battery) | VHF: approx. 13.5 hours / 12 hours (GPS mode) UHF: approx. 15.5 hours / 14 hours (GPS mode) |
| Frequency stability | ±1.5 ppm |
| Antenna impedance | 50 Ω |
| Dimensions (H×W×D, with standard battery, without antenna) | 125 x 55 x 35 mm |
| Weight (with antenna and standard battery) | 335 g |
Transmitter
| Transmitting power | VHF: 1 / 5 W |
| Modulation | 11 K0F3E at 12.5 kHz |
| 4FSK digital modulation | 12.5 kHz (data only): 7K60FXD |
| Interfering signals and harmonics | -36 dBm < 1 GHz |
| Modulation limiting | ±2.5 kHz at 12.5 kHz |
| Hum and noise | 40 dB at 12.5 kHz |
| Adjacent channel selectivity | 60 dB at 12.5 kHz |
| Voice output | +1 dB to -3 dB |
| Audio distortion | ≤ 3 % |
| Digital vocoder type | AMBE+2™ |
Receiver
| Sensitivity (analog) | 0.3 μV (12 dB SINAD) |
| Sensitivity (digital) | 0.3 μV / BER 5 % |
| Adjacent channel selectivity | TIA-603: 60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz |
| Intermodulation | TIA-603: 70 dB at 12.5/20/25 kHz |
| Spurious response rejection | TIA-603: 70 dB at 12.5/20/25 kHz |
| Signal-noise ratio (S/N) | 40 dB at 12.5 kHz |
| Nominal audio power output | 0.5 W |
| Audio distortion | ≤ 3 % |
| Audio sensitivity | +1 dB to -3 dB |
| Conducted spurious emission | < -57 dBm |
Environmental conditions
| Operating temperature range | -30 °C to +60 °C |
| Storage temperature range | -40 °C to +85 °C |
| ESD | IEC 61000-4-2 (level 4) |
| Protection against dust and moisture | IP67 |
| Shock and vibration resistance | MIL-STD-810 C/D/E/F/G |
| Relative humidity | MIL-STD-810 C/D/E/F/G |
GPS (PD705G only)
| Time to first fix (TTFF) cold start | < 1 minute |
| Time to first fix (TTFF) warm start | < 10 seconds |
| Horizontal accuracy | < 10 meter |
